How Long Does a Car Trailer Last? Car Hauler Maintenance Checklist

“How long does a car trailer last?” depends less on the calendar and more on how the trailer is built, how hard it works, and how well it’s maintained. A well-built car hauler that’s inspected and serviced on schedule can stay on the road and earning for many years. A neglected one wears out fast. This guide covers what affects car trailer lifespan and gives you a car hauler maintenance checklist to keep yours working.
What affects how long a car trailer lasts
- Build quality: frame design, welds, axles, suspension and hydraulics all decide how well a trailer holds up under years of heavy loads. Name-brand components (like Dexter axles, Hutch suspension and Optronics LED lights) are easier to service and find parts for.
- How it’s used: overloading, rough roads and hard stops shorten the life of axles, tires, decks and hydraulics.
- Maintenance: bearings, brakes, tires and hydraulics need regular service. Most expensive failures start as small, cheap fixes that got skipped.
- Weather and storage: sun, rain and road salt attack paint, wiring, hoses and tires. Rust that starts at a chip spreads if it isn’t touched up.
Car hauler maintenance checklist
The intervals below follow Dexter’s recommended maintenance schedule for its axles and brakes, the axles used on every Infinity car hauler. Always follow the manuals that came with your trailer and its components.
Before every trip
- Test the trailer brakes and brake controller.
- Check tire pressure (cold) on all eight tires and the spare; look for cuts, bulges and uneven wear.
- Check wheel nuts are tight to the specified torque.
- Test all lights: brake, turn, tail and clearance.
- Inspect the kingpin, fifth wheel connection and plugs.
- Check the hydraulic system: fluid level, hoses and fittings for leaks, and battery charge.
- Inspect straps for cuts, fraying or sun damage, and check ramps and decks for damage.
Every 6 months or 6,000 miles
- Inspect brake components for wear and correct operation, and check the brake controller settings.
- Inspect suspension parts for wear or loose parts.
- Inspect wheels for cracks or damage.
Every 12 months or 12,000 miles
- Remove the hubs, inspect and repack (or replace) the wheel bearings, and replace the grease seals.
- Inspect brake linings, drums and hardware, and service the brakes.
- Inspect the frame, crossmembers and welds for cracks or rust.
- Service the hydraulic system per the pump manufacturer, and inspect cylinders for leaks.
- Check all wiring and connectors for corrosion or damage.
As needed
- Touch up paint chips and scratches before rust starts.
- Wash off mud and road salt, especially underneath.
- Replace tires when worn or aged; trailer tires can age out before the tread wears out, especially in the Texas sun.
- Re-torque wheel nuts after any wheel or tire is removed and remounted.
Signs your trailer needs attention
- Hot hubs after a run, or grinding or squealing from a wheel
- Uneven or fast tire wear
- Trailer pulling to one side or weak braking
- Slow or jerky hydraulic ramps or decks
- Flickering lights or blown fuses
- Cracks in welds, or rust spreading from chips
Tips to make your car hauler last longer
- Stay within the trailer’s 25,900 lb GVWR, and load heavy vehicles low and forward. See how to load a car hauler.
- Drive smoothly: gentle starts and stops are easier on the axles, brakes and tires.
- Keep a maintenance log with dates and miles.
- Park on firm, level ground and keep the trailer covered when you can.
- Fix small problems right away.
More reading: trailer wheels and tires, tandem axle trailers and common towing mistakes.
Built to work, backed by a warranty
Every Infinity Trailers car hauler is built in Haslet, Texas, with Dexter tandem dual axles and hydraulic brakes, a Hutch H-9700 suspension, Roadmaster 18 ply tires and Optronics LED lighting, and comes with a one year warranty against manufacturing defects in workmanship. Browse our car hauler trailers for sale, or call or text 806-655-5500.










